standardization kicked off officially around 2021. it’s still in development, but very close to completion. when it lands, it’ll plug directly into Wi-Fi networks while sipping power like it's 1999.

task group: yup, this one has a name: Task Group bi. its sole purpose: bring true ultra-low-power operation to 802.11 devices using a second, tiny radio that just listens for a wake-up signal.

so how does it work?

  • Dual-radio approach: device has a low-power **Wake-Up Receiver (WURx)** that listens for special frames while the main Wi-Fi radio stays off
  • Wake-Up frames: access points send tiny, optimized wake-up packets (outside normal traffic) to trigger the main radio
  • Power savings: since the WURx draws microwatts of power, the device can stay in deep sleep **most of the time**
  • Standard-compliant: fully integrated with 802.11 networks – it’s Wi-Fi, just sleepy
  • Low latency wake-up: device wakes fast when needed – not polling, just passively waiting

it’s not for your laptop. it’s for your door sensor, pet tracker, smart light switch, and soil monitor – the stuff that lives forever in the background.

when finalized, 802.11bi will be rolled into the next full 802.11 standard revision – likely after 802.11-2023. but expect early adoption in smart home and industrial use cases sooner.

802.11bi is Wi-Fi for the sleepy ones. they don’t need bandwidth – just **a polite wake-up knock and a quick hello**.

IEEE 802.11 Working Group ↗